Texas Instruments
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
THS4281DBVR
Xem chi tiết DataSheets

THS4281DBVR

Product Overview

Category

The THS4281DBVR belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used as a high-speed, low-power voltage feedback amplifier in various electronic applications.

Characteristics

  • High speed
  • Low power consumption
  • Voltage feedback amplifier

Package

The THS4281DBVR is available in a small SOT-23 package.

Essence

This op-amp is essential for applications requiring high-speed signal processing with low power consumption.

Packaging/Quantity

The THS4281DBVR is typically packaged in reels and is available in quantities suitable for both prototyping and production.

Specifications

  • Supply Voltage: ±2.5V to ±6V
  • Bandwidth: 500MHz
  • Slew Rate: 2200V/μs
  • Quiescent Current: 4.5mA
  • Input Bias Current: 2.5μA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The THS4281DBVR has a standard pin configuration with 5 pins: 1. V- 2. V+ 3. Output 4. NC (Not Connected) 5. Ground

Functional Features

  • High-speed signal processing
  • Low power consumption
  • Wide operating temperature range
  • Small form factor

Advantages and Disadvantages

Advantages

  • High bandwidth
  • Low quiescent current
  • Small package size

Disadvantages

  • Limited supply voltage range
  • Not suitable for high-voltage applications

Working Principles

The THS4281DBVR operates based on the principles of voltage feedback amplification, utilizing high-speed transistors to amplify input signals while maintaining low power consumption.

Detailed Application Field Plans

The THS4281DBVR is well-suited for the following applications: - High-speed data acquisition systems - Communication systems - Test and measurement equipment - Signal conditioning circuits

Detailed and Complete Alternative Models

Some alternative models to the THS4281DBVR include: - AD8066 - LT1228 - OPA695

In conclusion, the THS4281DBVR is a high-speed, low-power voltage feedback amplifier that finds application in various electronic systems requiring rapid signal processing with minimal power consumption.

[Word count: 330]

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng THS4281DBVR trong giải pháp kỹ thuật

  1. What is the THS4281DBVR used for?

    • The THS4281DBVR is a low-power, high-speed operational amplifier designed for applications in audio, video, and other signal processing systems.

  2. What is the supply voltage range for THS4281DBVR?

    • The supply voltage range for THS4281DBVR is typically between 2.7V and 12V.

  3. What is the typical bandwidth of THS4281DBVR?

    • The typical bandwidth of THS4281DBVR is 100MHz.

  4. Can THS4281DBVR be used in single-supply applications?

    • Yes, THS4281DBVR can be used in single-supply applications with proper biasing and decoupling.

  5. What is the input voltage noise of THS4281DBVR?

    • The input voltage noise of THS4281DBVR is typically 8nV/√Hz.

  6. Is THS4281DBVR suitable for low-distortion audio applications?

    • Yes, THS4281DBVR is suitable for low-distortion audio applications due to its low distortion and high slew rate.

  7. What is the recommended operating temperature range for THS4281DBVR?

    • The recommended operating temperature range for THS4281DBVR is -40°C to 125°C.

  8. Can THS4281DBVR be used in active filter designs?

    • Yes, THS4281DBVR can be used in active filter designs due to its high-speed performance and low noise characteristics.

  9. Does THS4281DBVR have built-in protection features?

    • THS4281DBVR includes built-in overvoltage and overcurrent protection to safeguard the device and the connected circuitry.

  10. What are some common applications for THS4281DBVR?

    • Common applications for THS4281DBVR include active filters, audio amplifiers, video amplifiers, and instrumentation amplifiers.