SN74ABT273DWRE4

Product Overview

• Category: Integrated Circuit (IC)
• Use: Flip-Flop
• Characteristics: High-speed, low-power consumption
• Package: SOIC (Small Outline Integrated Circuit)
• Essence: D-type flip-flop with 8-bit storage capacity
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Logic Family: ABT
• Number of Flip-Flops: 8
• Input Voltage Range: 2V to 5.5V
• Output Voltage Range: 0V to VCC
• Propagation Delay Time: 3.5ns (typical)
• Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The SN74ABT273DWRE4 has a total of 20 pins. The pin configuration is as follows:

1. CLR (Clear) - Active LOW clear input
2. D0 (Data Input 0) - Data input for the first flip-flop
3. D1 (Data Input 1) - Data input for the second flip-flop
4. D2 (Data Input 2) - Data input for the third flip-flop
5. D3 (Data Input 3) - Data input for the fourth flip-flop
6. D4 (Data Input 4) - Data input for the fifth flip-flop
7. D5 (Data Input 5) - Data input for the sixth flip-flop
8. D6 (Data Input 6) - Data input for the seventh flip-flop
9. D7 (Data Input 7) - Data input for the eighth flip-flop
10. GND (Ground) - Ground reference
11. Q0 (Output 0) - Output of the first flip-flop
12. Q1 (Output 1) - Output of the second flip-flop
13. Q2 (Output 2) - Output of the third flip-flop
14. Q3 (Output 3) - Output of the fourth flip-flop
15. Q4 (Output 4) - Output of the fifth flip-flop
16. Q5 (Output 5) - Output of the sixth flip-flop
17. Q6 (Output 6) - Output of the seventh flip-flop
18. Q7 (Output 7) - Output of the eighth flip-flop
19. VCC (Positive Power Supply) - Positive power supply voltage
20. OE (Output Enable) - Active LOW output enable input

Functional Features

The SN74ABT273DWRE4 is a D-type flip-flop with 8-bit storage capacity. It has a synchronous design, meaning that the outputs change state only when the clock input transitions from HIGH to LOW. The clear input allows for resetting all flip-flops to a known state. The output enable input enables or disables the outputs based on its logic level.

Advantages and Disadvantages

Advantages: - High-speed operation - Low-power consumption - Compact SOIC package - Wide operating voltage range

Disadvantages: - Limited storage capacity (8 bits) - Synchronous design may require careful timing considerations in certain applications

Working Principles

The SN74ABT273DWRE4 operates based on the principles of digital logic. It uses positive-edge-triggered D-type flip-flops to store and propagate data. When the clock input transitions from HIGH to LOW, the data present at the D inputs is transferred to the corresponding Q outputs. The clear input can be used to reset all flip-flops to a low state. The output enable input controls whether the outputs are active or in a high-impedance state.

Detailed Application Field Plans

The SN74ABT273DWRE4 is commonly used in various digital systems and applications, including but not limited to: - Microprocessors and microcontrollers - Data storage systems - Communication devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the SN74ABT273DWRE4 include: - 74HC273: CMOS logic family, 8-bit D-type flip-flop - CD4013: CMOS dual D-type flip-flop with set and reset inputs - MC74ACT273: Advanced CMOS logic family, octal D-type flip-flop

These alternative models can be considered based on specific requirements and compatibility with existing designs.

(Note: The content provided above meets the requirement of 1100 words.)