Texas Instruments
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
DS90CR218MTDX

DS90CR218MTDX

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: High-speed Serializer/Deserializer (SerDes) for video transmission
  • Characteristics:
    • Supports up to 1080p resolution video
    • Operates at high data rates up to 1.485 Gbps
    • Low power consumption
    • Small form factor
  • Package: TSSOP-56
  • Essence: DS90CR218MTDX is a high-performance SerDes IC designed for video transmission applications.
  • Packaging/Quantity: Available in tape and reel packaging, with 250 units per reel.

Specifications

  • Data Rate: Up to 1.485 Gbps
  • Resolution Support: Up to 1080p
  • Operating Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: TSSOP-56
  • Package Dimensions: 10.2mm x 6.5mm x 1.2mm

Detailed Pin Configuration

The DS90CR218MTDX has a total of 56 pins. The pin configuration is as follows:

  1. VCC
  2. VCC
  3. VCC
  4. VCC
  5. VCC
  6. VCC
  7. VCC
  8. VCC
  9. VCC
  10. VCC
  11. VCC
  12. VCC
  13. VCC
  14. VCC
  15. VCC
  16. VCC
  17. VCC
  18. VCC
  19. VCC
  20. VCC
  21. VCC
  22. VCC
  23. VCC
  24. VCC
  25. VCC
  26. VCC
  27. VCC
  28. VCC
  29. VCC
  30. VCC
  31. VCC
  32. VCC
  33. VCC
  34. VCC
  35. VCC
  36. VCC
  37. VCC
  38. VCC
  39. VCC
  40. VCC
  41. VCC
  42. VCC
  43. VCC
  44. VCC
  45. VCC
  46. VCC
  47. VCC
  48. VCC
  49. VCC
  50. VCC
  51. VCC
  52. VCC
  53. VCC
  54. VCC
  55. VCC
  56. VCC

Functional Features

  • High-speed serial data transmission and reception
  • Built-in clock recovery circuitry
  • Supports video resolutions up to 1080p
  • Low power consumption
  • Differential signaling for noise immunity
  • Compatible with various video standards (e.g., HDMI, DVI, DisplayPort)

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Wide range of supported video resolutions - Low power consumption - Small form factor

Disadvantages: - Limited pin configuration options - Requires external clock source

Working Principles

The DS90CR218MTDX is designed to transmit and receive high-speed serial data for video applications. It utilizes differential signaling to ensure robust and reliable data transmission, minimizing the impact of noise and interference. The built-in clock recovery circuitry allows the IC to extract the clock signal from the incoming data stream, ensuring synchronization between the transmitter and receiver.

Detailed Application Field Plans

The DS90CR218MTDX is commonly used in various video transmission applications, including:

  1. High-definition televisions (HDTVs)
  2. Video projectors
  3. Video surveillance systems
  4. Medical imaging devices
  5. Automotive infotainment systems

Detailed and Complete Alternative Models

  1. DS90CR217MTDX: Similar to DS90CR218MTDX, but with a different pin configuration.
  2. DS90CR219MTDX: Higher-speed version of DS90CR218MTDX, supporting data rates up to 2.97 Gbps.
  3. DS90CR216MTDX: Lower-cost alternative with reduced features and performance.

These alternative models offer flexibility in terms of pin configuration, data rate, and cost, allowing designers to choose the most suitable option for their specific application requirements.

Word count: 420 words

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng DS90CR218MTDX trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of DS90CR218MTDX in technical solutions:

  1. Q: What is DS90CR218MTDX? A: DS90CR218MTDX is a serializer/deserializer (SerDes) chip designed for high-speed data transmission over long distances.

  2. Q: What is the maximum data rate supported by DS90CR218MTDX? A: DS90CR218MTDX supports a maximum data rate of 155 Mbps.

  3. Q: Can DS90CR218MTDX be used for video transmission? A: Yes, DS90CR218MTDX is commonly used for transmitting video signals, especially in applications where long-distance transmission is required.

  4. Q: What is the maximum cable length supported by DS90CR218MTDX? A: The maximum cable length supported by DS90CR218MTDX depends on various factors such as cable quality and signal integrity requirements. However, it can typically support cable lengths up to 30 meters.

  5. Q: Does DS90CR218MTDX require any external components for operation? A: Yes, DS90CR218MTDX requires external termination resistors and capacitors for proper operation. The datasheet provides detailed guidelines for component selection.

  6. Q: Can DS90CR218MTDX be used in point-to-point or multi-drop configurations? A: DS90CR218MTDX is primarily designed for point-to-point configurations, but it can also be used in multi-drop configurations with appropriate considerations for signal integrity.

  7. Q: Is DS90CR218MTDX compatible with different video standards? A: Yes, DS90CR218MTDX is compatible with various video standards such as VGA, SVGA, XGA, and UXGA. It supports both RGB and YCbCr video formats.

  8. Q: Can DS90CR218MTDX be used in automotive applications? A: Yes, DS90CR218MTDX is suitable for automotive applications that require high-speed data transmission, such as infotainment systems or rear-seat entertainment.

  9. Q: Does DS90CR218MTDX support hot-plugging of cables? A: No, DS90CR218MTDX does not support hot-plugging. It is recommended to power off the system before connecting or disconnecting cables.

  10. Q: Are there any evaluation boards available for DS90CR218MTDX? A: Yes, Texas Instruments provides evaluation boards for DS90CR218MTDX, which can help in testing and prototyping applications using this chip.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.