The CY74FCT16245TPVCT has a total of 48 pins arranged in a TSSOP package. The pin configuration is as follows:
+-------------------+
OE1 |1 48| VCC
A1 |2 47| B1
A2 |3 46| B2
A3 |4 45| B3
A4 |5 44| B4
A5 |6 43| B5
A6 |7 42| B6
A7 |8 41| B7
A8 |9 40| B8
A9 |10 39| B9
A10 |11 38| B10
A11 |12 37| B11
A12 |13 36| B12
A13 |14 35| B13
A14 |15 34| B14
A15 |16 33| B15
A16 |17 32| B16
GND |18 31| OE2
Y1 |19 30| Y2
Y3 |20 29| Y4
Y5 |21 28| Y6
Y7 |22 27| Y8
Y9 |23 26| Y10
Y11 |24 25| Y12
+-------------------+
The CY74FCT16245TPVCT operates by receiving digital signals from one voltage domain and shifting them to another voltage domain. It utilizes a combination of MOSFETs and CMOS technology to achieve bidirectional level shifting. The input signals are translated to the desired output voltage levels, allowing seamless communication between devices operating at different voltage ranges.
The CY74FCT16245TPVCT is commonly used in various applications that require level shifting between different voltage domains. Some typical application fields include: - Microcontroller interfacing with peripheral devices - Communication systems involving different voltage logic families - Data transmission between devices with varying voltage requirements - Interface conversion in mixed-voltage systems
Sure! Here are 10 common questions and answers related to the application of CY74FCT16245TPVCT in technical solutions:
Question: What is the CY74FCT16245TPVCT?
Answer: The CY74FCT16245TPVCT is a 16-bit bus transceiver with 3-state outputs, designed for high-speed CMOS applications.
Question: What is the maximum operating frequency of the CY74FCT16245TPVCT?
Answer: The maximum operating frequency of the CY74FCT16245TPVCT is typically around 200 MHz.
Question: Can the CY74FCT16245TPVCT be used for bidirectional data transfer?
Answer: Yes, the CY74FCT16245TPVCT supports bidirectional data transfer, making it suitable for applications where data needs to be transmitted in both directions.
Question: What is the voltage supply range for the CY74FCT16245TPVCT?
Answer: The CY74FCT16245TPVCT operates with a voltage supply range of 4.5V to 5.5V.
Question: Does the CY74FCT16245TPVCT have built-in ESD protection?
Answer: Yes, the CY74FCT16245TPVCT has built-in ESD protection, which helps safeguard against electrostatic discharge events.
Question: Can the CY74FCT16245TPVCT be used in high-noise environments?
Answer: Yes, the CY74FCT16245TPVCT has noise immunity features that make it suitable for use in high-noise environments.
Question: What is the output drive strength of the CY74FCT16245TPVCT?
Answer: The CY74FCT16245TPVCT has a balanced output drive strength of ±24 mA, which ensures reliable signal transmission.
Question: Can the CY74FCT16245TPVCT be used in hot-swapping applications?
Answer: Yes, the CY74FCT16245TPVCT supports hot-swapping, allowing for easy insertion and removal of the device without causing damage.
Question: Does the CY74FCT16245TPVCT have internal pull-up or pull-down resistors?
Answer: No, the CY74FCT16245TPVCT does not have internal pull-up or pull-down resistors. External resistors may be required for proper operation.
Question: What is the package type of the CY74FCT16245TPVCT?
Answer: The CY74FCT16245TPVCT is available in a 48-pin TSSOP (Thin Shrink Small Outline Package) package.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.