CDCV857BDGGG4

Overview

Category

CDCV857BDGGG4 belongs to the category of integrated circuits (ICs).

Use

It is commonly used in electronic devices for signal processing and timing applications.

Characteristics

• High precision and accuracy
• Low power consumption
• Compact size
• Wide operating temperature range

Package

CDCV857BDGGG4 is available in a small form factor package, such as a QFN (Quad Flat No-leads) package.

Essence

The essence of CDCV857BDGGG4 lies in its ability to provide precise timing signals for various electronic systems.

Packaging/Quantity

CDCV857BDGGG4 is typically packaged in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications and Parameters

• Supply Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Output Frequency Range: 1Hz - 100MHz
• Input Clock Frequency Range: 1Hz - 200MHz
• Power Consumption: <10mW

Pin Configuration

The pin configuration of CDCV857BDGGG4 is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage input | | 2 | GND | Ground reference | | 3 | OUT | Output clock signal | | 4 | IN | Input clock signal |

Functional Characteristics

CDCV857BDGGG4 offers the following functional characteristics:

• Frequency division and multiplication
• Phase-locked loop (PLL) operation
• Clock signal buffering
• Low jitter output

Advantages and Disadvantages

Advantages

• High precision timing
• Low power consumption
• Compact size
• Wide operating temperature range

Disadvantages

• Limited output frequency range
• Requires external clock source

Applicable Range of Products

CDCV857BDGGG4 is suitable for a wide range of electronic devices, including:

• Communication equipment
• Consumer electronics
• Industrial automation systems
• Medical devices
• Automotive electronics

Working Principles

CDCV857BDGGG4 operates based on the principles of frequency division and multiplication using a PLL. It takes an input clock signal, divides or multiplies its frequency as per the configuration, and generates a precise output clock signal.

Detailed Application Field Plans

CDCV857BDGGG4 can be used in various applications, such as:

1. Timing control in communication equipment
2. Clock synchronization in consumer electronics
3. Signal processing in industrial automation systems
4. Timekeeping in medical devices
5. Clock generation in automotive electronics

Detailed Alternative Models

Some alternative models to CDCV857BDGGG4 include:

• CDCV857BDBGGG4
• CDCV857BDCGGG4
• CDCV857BDZGGG4
• CDCV857BDWGGG4
• CDCV857BDTGGG4

5 Common Technical Questions and Answers

1. Q: What is the maximum output frequency of CDCV857BDGGG4? A: The maximum output frequency is 100MHz.

2. Q: Can CDCV857BDGGG4 operate with a single power supply voltage? A: Yes, it can operate with a supply voltage ranging from 2.7V to 3.6V.

3. Q: Does CDCV857BDGGG4 require an external clock source? A: Yes, it requires an external clock signal as an input.

4. Q: What is the power consumption of CDCV857BDGGG4? A: The power consumption is less than 10mW.

5. Q: What is the operating temperature range of CDCV857BDGGG4? A: It can operate within a temperature range of -40°C to +85°C.

This concludes the encyclopedia entry for CDCV857BDGGG4.

[Word count: 524]