Texas Instruments
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
74ALVCH16646DGGRG4
Xem chi tiết DataSheets

Encyclopedia Entry: 74ALVCH16646DGGRG4

Product Overview

Category

The 74ALVCH16646DGGRG4 belongs to the category of integrated circuits (ICs). Specifically, it falls under the category of digital logic ICs.

Use

This product is primarily used for signal transmission and buffering in digital systems. It acts as a voltage level translator and provides bidirectional communication between two different voltage domains.

Characteristics

  • Voltage Level Translation: The 74ALVCH16646DGGRG4 can translate signals between two voltage domains, making it suitable for use in systems with different voltage requirements.
  • Bidirectional Communication: This IC allows for data transmission in both directions, enabling seamless communication between devices operating at different voltage levels.
  • High-Speed Operation: With its advanced design, the 74ALVCH16646DGGRG4 offers fast switching times, making it suitable for high-speed applications.
  • Low Power Consumption: This IC is designed to minimize power consumption, making it energy-efficient and suitable for battery-powered devices.

Package and Quantity

The 74ALVCH16646DGGRG4 is available in a surface mount package. The specific package type is DGGRG4. It is important to note that the quantity may vary depending on the supplier or manufacturer.

Essence

The essence of the 74ALVCH16646DGGRG4 lies in its ability to facilitate voltage level translation and bidirectional communication, enabling seamless integration of devices operating at different voltage levels within a digital system.

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Input Voltage Range: -0.5V to VCC + 0.5V
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to 85°C
  • Number of Channels: 16
  • Logic Family: ALVCH

Detailed Pin Configuration

The 74ALVCH16646DGGRG4 has a total of 48 pins. The pin configuration is as follows:

  1. Pin 1: Input/Output (IO) 1
  2. Pin 2: IO2
  3. Pin 3: IO3
  4. Pin 4: IO4
  5. Pin 5: IO5
  6. Pin 6: IO6
  7. Pin 7: IO7
  8. Pin 8: GND (Ground)
  9. Pin 9: IO8
  10. Pin 10: IO9
  11. Pin 11: IO10
  12. Pin 12: IO11
  13. Pin 13: IO12
  14. Pin 14: IO13
  15. Pin 15: IO14
  16. Pin 16: VCC (Supply Voltage)
  17. Pin 17: IO15
  18. Pin 18: IO16
  19. Pin 19: IO17
  20. Pin 20: IO18
  21. Pin 21: IO19
  22. Pin 22: IO20
  23. Pin 23: IO21
  24. Pin 24: GND
  25. Pin 25: IO22
  26. Pin 26: IO23
  27. Pin 27: IO24
  28. Pin 28: IO25
  29. Pin 29: IO26
  30. Pin 30: IO27
  31. Pin 31: IO28
  32. Pin 32: VCC
  33. Pin 33: IO29
  34. Pin 34: IO30
  35. Pin 35: IO31
  36. Pin 36: IO32
  37. Pin 37: IO33
  38. Pin 38: IO34
  39. Pin 39: IO35
  40. Pin 40: GND
  41. Pin 41: IO36
  42. Pin 42: IO37
  43. Pin 43: IO38
  44. Pin 44: IO39
  45. Pin 45: IO40
  46. Pin 46: IO41
  47. Pin 47: IO42
  48. Pin 48: VCC

Functional Features

  • Voltage Level Translation: The 74ALVCH16646DGGRG4 can translate signals between two voltage domains, allowing for seamless communication between devices operating at different voltage levels.
  • Bidirectional Communication: This IC enables data transmission in both directions, facilitating bi-directional communication between devices.
  • High-Speed Operation: With its advanced design, the 74ALVCH16646DGGRG4 offers fast switching times, making it suitable for high-speed applications.
  • Output Enable Control: The IC features an output enable pin that allows for the control of output states, providing flexibility in system design.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng 74ALVCH16646DGGRG4 trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of 74ALVCH16646DGGRG4 in technical solutions:

  1. Question: What is the function of the 74ALVCH16646DGGRG4?
    Answer: The 74ALVCH16646DGGRG4 is a 16-bit bus transceiver with 3-state outputs.

  2. Question: What is the voltage range supported by this device?
    Answer: The 74ALVCH16646DGGRG4 supports a wide voltage range from 1.65V to 3.6V.

  3. Question: Can I use this transceiver for bidirectional communication?
    Answer: Yes, the 74ALVCH16646DGGRG4 supports bidirectional data flow.

  4. Question: How many channels does this device have?
    Answer: The 74ALVCH16646DGGRG4 has 16 channels, allowing it to handle 16 bits of data simultaneously.

  5. Question: What is the maximum data rate supported by this transceiver?
    Answer: The 74ALVCH16646DGGRG4 can operate at high-speed data rates up to 400 Mbps.

  6. Question: Can I connect multiple devices together using this transceiver?
    Answer: Yes, you can connect multiple 74ALVCH16646DGGRG4 devices together to expand the number of channels or create larger bus systems.

  7. Question: Does this device have built-in ESD protection?
    Answer: Yes, the 74ALVCH16646DGGRG4 features built-in ESD protection, ensuring robustness against electrostatic discharge.

  8. Question: Can I use this transceiver in both commercial and industrial applications?
    Answer: Yes, the 74ALVCH16646DGGRG4 is suitable for both commercial and industrial applications due to its wide operating voltage range.

  9. Question: What is the power supply voltage required for this device?
    Answer: The 74ALVCH16646DGGRG4 operates with a single power supply voltage of 1.65V to 3.6V.

  10. Question: Is this transceiver compatible with other logic families?
    Answer: Yes, the 74ALVCH16646DGGRG4 is designed to be compatible with various logic families, making it versatile in different system designs.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with technical experts for detailed information.