SSI Technologies Inc
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
P51-1000-S-H-I12-20MA-000-000
Xem chi tiết DataSheets

P51-1000-S-H-I12-20MA-000-000

Introduction

The P51-1000-S-H-I12-20MA-000-000 is a precision pressure transducer designed for use in industrial applications. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Industrial Pressure Transducer
  • Use: Measurement and monitoring of pressure in industrial processes
  • Characteristics: High precision, rugged design, compatibility with various media, and reliable performance
  • Package: Typically supplied in a protective casing with necessary connectors and accessories
  • Essence: Accurate and reliable pressure measurement for industrial applications
  • Packaging/Quantity: Usually packaged individually, quantity may vary based on supplier

Specifications

  • Model: P51-1000-S-H-I12-20MA-000-000
  • Pressure Range: 0 to 1000 psi
  • Output Signal: 4-20 mA
  • Accuracy: ±0.5% full scale
  • Operating Temperature: -40°C to 85°C
  • Media Compatibility: Compatible with various liquids and gases
  • Electrical Connection: Integral cable or connector options available

Detailed Pin Configuration

The detailed pin configuration for the P51-1000-S-H-I12-20MA-000-000 is as follows: 1. Power Supply (+) 2. Power Supply (-) 3. Signal Output 4. Not Connected 5. Not Connected

Functional Features

  • High Precision: Provides accurate pressure measurements within specified ranges
  • Rugged Design: Built to withstand harsh industrial environments
  • Media Compatibility: Suitable for use with a wide range of media
  • Reliable Performance: Consistent and dependable operation over extended periods

Advantages and Disadvantages

Advantages

  • Accurate and reliable pressure measurement
  • Robust construction for industrial use
  • Wide media compatibility
  • Long-term stability and performance

Disadvantages

  • Higher initial cost compared to standard pressure sensors
  • Requires periodic calibration and maintenance

Working Principles

The P51-1000-S-H-I12-20MA-000-000 operates on the principle of strain gauge technology. When pressure is applied, the strain gauges deform, causing a change in resistance. This change is then converted into an electrical signal proportional to the applied pressure, which is transmitted as the output signal.

Detailed Application Field Plans

The P51-1000-S-H-I12-20MA-000-000 is suitable for a wide range of industrial applications, including: - Hydraulic systems - Process control and automation - Industrial machinery - Test and measurement equipment - HVAC systems

Detailed and Complete Alternative Models

  • Model A: P51-500-S-H-I12-20MA-000-000 (0-500 psi range)
  • Model B: P51-2000-S-H-I12-20MA-000-000 (0-2000 psi range)
  • Model C: P51-5000-S-H-I12-20MA-000-000 (0-5000 psi range)

In conclusion, the P51-1000-S-H-I12-20MA-000-000 is a precision pressure transducer with high accuracy, rugged design, and wide applicability in industrial settings. Its reliability and performance make it a valuable component in various industrial processes.

[Word Count: 498]

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng P51-1000-S-H-I12-20MA-000-000 trong giải pháp kỹ thuật

  1. What is the P51-1000-S-H-I12-20MA-000-000 used for?

    • The P51-1000-S-H-I12-20MA-000-000 is a pressure transducer commonly used to measure and transmit pressure readings in various technical applications.

  2. What is the operating range of the P51-1000-S-H-I12-20MA-000-000?

    • The operating range of the P51-1000-S-H-I12-20MA-000-000 is typically from 0 to 1000 psi, making it suitable for a wide range of pressure measurement tasks.

  3. What are the output signals supported by the P51-1000-S-H-I12-20MA-000-000?

    • The P51-1000-S-H-I12-20MA-000-000 typically provides a 4-20mA output signal, which is commonly used in industrial control and monitoring systems.

  4. Can the P51-1000-S-H-I12-20MA-000-000 be used in hazardous environments?

    • Yes, the P51-1000-S-H-I12-20MA-000-000 is available with intrinsically safe certifications, allowing its use in hazardous environments.

  5. What are the typical applications for the P51-1000-S-H-I12-20MA-000-000?

    • The P51-1000-S-H-I12-20MA-000-000 is often used in hydraulic systems, industrial machinery, process control, and HVAC systems for pressure monitoring and control.

  6. Is the P51-1000-S-H-I12-20MA-000-000 compatible with different media types?

    • Yes, the P51-1000-S-H-I12-20MA-000-000 is available with various diaphragm and seal materials to ensure compatibility with different media types, including corrosive fluids.

  7. What is the accuracy of the P51-1000-S-H-I12-20MA-000-000?

    • The P51-1000-S-H-I12-20MA-000-000 typically offers high accuracy, often within ±0.25% or better, ensuring reliable pressure measurements.

  8. Can the P51-1000-S-H-I12-20MA-000-000 be integrated with PLCs or control systems?

    • Yes, the 4-20mA output signal of the P51-1000-S-H-I12-20MA-000-000 allows for seamless integration with PLCs, DCS, and other control systems.

  9. What is the temperature range for operation of the P51-1000-S-H-I12-20MA-000-000?

    • The P51-1000-S-H-I12-20MA-000-000 is designed to operate within a wide temperature range, typically from -40°C to 85°C, making it suitable for diverse environments.

  10. Is the P51-1000-S-H-I12-20MA-000-000 easy to install and maintain?

    • Yes, the P51-1000-S-H-I12-20MA-000-000 is designed for easy installation and maintenance, with options for various mounting configurations and simple calibration procedures.