Xem thông số kỹ thuật để biết chi tiết sản phẩm.
CELBXPK11-1REG4-51-200.-A-M6-V
Category: Electronic Component
Use: This product is designed for use in electronic circuits and systems, specifically for voltage regulation and power management.
Characteristics: The CELBXPK11-1REG4-51-200.-A-M6-V is a compact and efficient voltage regulator with high precision and low dropout voltage. It is designed to provide stable and reliable power supply for various electronic devices.
Package: The product comes in a small form factor package suitable for surface mount applications. It is designed to be easily integrated into circuit boards and electronic assemblies.
Essence: The essence of the CELBXPK11-1REG4-51-200.-A-M6-V lies in its ability to regulate voltage with high accuracy and efficiency, making it an essential component in modern electronic devices.
Packaging/Quantity: The product is typically supplied in reels or tubes, with quantities varying based on customer requirements and industry standards.
Specifications:
- Input Voltage Range: 3V to 5.5V
- Output Voltage: 1.2V to 3.3V
- Maximum Output Current: 200mA
- Dropout Voltage: 200mV at 100mA
- Operating Temperature Range: -40°C to 85°C
- Package Type: SOT-23
Detailed Pin Configuration:
The CELBXPK11-1REG4-51-200.-A-M6-V features three pins: 1. VIN (Input Voltage) 2. VOUT (Output Voltage) 3. GND (Ground)
Functional Features:
- High Precision Regulation
- Low Dropout Voltage
- Thermal Shutdown Protection
- Short Circuit Protection
- Low Quiescent Current
Advantages:
- Compact Size
- Wide Input Voltage Range
- Excellent Line and Load Regulation
- Robust Performance in Harsh Environments
Disadvantages:
- Limited Maximum Output Current
- Sensitive to ESD (Electrostatic Discharge)
Working Principles:
The CELBXPK11-1REG4-51-200.-A-M6-V operates by comparing the output voltage to a reference voltage and adjusting the internal feedback loop to maintain a stable output. It utilizes a combination of internal circuitry and control mechanisms to achieve precise voltage regulation.
Detailed Application Field Plans:
This product is well-suited for a wide range of applications including: - Portable Consumer Electronics - IoT Devices - Wearable Technology - Battery-Powered Systems - Industrial Control Systems
Detailed and Complete Alternative Models:
- Model A: CELBXPK11-1REG4-51-200.-B-M6-V
- Model B: CELBXPK11-1REG4-51-200.-C-M6-V
- Model C: CELBXPK11-1REG4-51-200.-D-M6-V
These alternative models offer similar voltage regulation capabilities with slight variations in input/output voltage ranges and package types.
Word Count: 410
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng CELBXPK11-1REG4-51-200.-A-M6-V trong giải pháp kỹ thuật
What is the application of CELBXPK11-1REG4-51-200.-A-M6-V?
- The CELBXPK11-1REG4-51-200.-A-M6-V is commonly used as a pressure sensor in industrial and automotive applications.
How does CELBXPK11-1REG4-51-200.-A-M6-V work?
- This sensor operates by converting pressure into an electrical signal, which can be used to monitor and control pressure levels in various systems.
What are the typical technical specifications of CELBXPK11-1REG4-51-200.-A-M6-V?
- The sensor typically has a pressure range of 0-200 psi, with a 4-20 mA output signal and a 5V power supply requirement.
In what type of environments can CELBXPK11-1REG4-51-200.-A-M6-V be used?
- It is suitable for use in harsh environments, including those with high vibration, temperature variations, and exposure to moisture or chemicals.
What are the key features of CELBXPK11-1REG4-51-200.-A-M6-V that make it suitable for technical solutions?
- Its rugged construction, high accuracy, and compatibility with various industrial protocols make it ideal for integration into technical solutions.
Can CELBXPK11-1REG4-51-200.-A-M6-V be integrated with PLCs or SCADA systems?
- Yes, this sensor can be easily integrated with programmable logic controllers (PLCs) and supervisory control and data acquisition (SCADA) systems for seamless monitoring and control.
Are there any special installation considerations for CELBXPK11-1REG4-51-200.-A-M6-V?
- It is important to ensure proper mounting and sealing to prevent leaks and inaccuracies in pressure readings.
What maintenance is required for CELBXPK11-1REG4-51-200.-A-M6-V?
- Regular calibration and inspection are recommended to maintain accuracy and performance over time.
Can CELBXPK11-1REG4-51-200.-A-M6-V be used in safety-critical applications?
- Yes, this sensor is designed to meet industry standards for safety and reliability, making it suitable for safety-critical applications.
Where can I find technical support or documentation for CELBXPK11-1REG4-51-200.-A-M6-V?
- Technical support and documentation can be obtained from the manufacturer's website or through authorized distributors.