ON Semiconductor
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MMBZ9V1ALT1
Xem chi tiết DataSheets

MMBZ9V1ALT1

Introduction

The MMBZ9V1ALT1 is a diode belonging to the category of Zener diodes. This component is commonly used in electronic circuits for voltage regulation and protection against voltage spikes. Its characteristics, package, essence, packaging/quantity, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models are detailed below.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection
  • Characteristics: Reverse breakdown voltage, low impedance, temperature stability
  • Package: SOT-23
  • Essence: Voltage regulation and transient voltage suppression
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Voltage Range: 8.4V to 9.9V
  • Power Dissipation: 350mW
  • Operating Temperature: -65°C to 150°C
  • Zener Impedance: 20Ω
  • Forward Voltage: 900mV

Detailed Pin Configuration

The MMBZ9V1ALT1 Zener diode has three pins: Cathode (K), Anode (A), and No Connection (NC).

| Pin | Description | |-----|-------------| | K | Cathode | | A | Anode | | NC | No Connection |

Functional Features

  • Voltage Regulation: The diode maintains a constant voltage across its terminals when operated in the reverse breakdown region.
  • Transient Voltage Suppression: It protects sensitive components in a circuit by diverting excess voltage away from them.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low impedance
  • Temperature stability

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to current surges

Working Principles

The MMBZ9V1ALT1 operates based on the principle of the Zener effect, where it exhibits a controlled breakdown at a specific reverse voltage. This allows it to maintain a nearly constant voltage across its terminals, providing effective regulation and protection.

Detailed Application Field Plans

The MMBZ9V1ALT1 is widely used in various electronic applications, including: - Voltage regulators in power supplies - Overvoltage protection in communication systems - Signal clamping in audio circuits - Surge suppression in automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the MMBZ9V1ALT1 include: - BZX84C9V1LT1 - MM3Z9V1ST1G - PZM9V1NT1G - MMSZ9V1T1G

In conclusion, the MMBZ9V1ALT1 Zener diode offers precise voltage regulation and transient voltage suppression, making it an essential component in various electronic circuits.

[Word Count: 387]

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MMBZ9V1ALT1 trong giải pháp kỹ thuật

  1. What is MMBZ9V1ALT1?

    • MMBZ9V1ALT1 is a dual surface mount Zener diode with a voltage range of 6.8V to 75V, commonly used for voltage regulation and transient suppression in electronic circuits.

  2. What are the typical applications of MMBZ9V1ALT1?

    • MMBZ9V1ALT1 is commonly used in voltage clamping, voltage regulation, and transient suppression in various electronic devices such as smartphones, tablets, and power supplies.

  3. What is the maximum power dissipation of MMBZ9V1ALT1?

    • The maximum power dissipation of MMBZ9V1ALT1 is typically around 200mW.

  4. What is the operating temperature range of MMBZ9V1ALT1?

    • The operating temperature range of MMBZ9V1ALT1 is usually between -55°C to +150°C.

  5. What is the package type of MMBZ9V1ALT1?

    • MMBZ9V1ALT1 is typically available in a small SOT-23 surface mount package.

  6. What is the reverse standoff voltage of MMBZ9V1ALT1?

    • The reverse standoff voltage of MMBZ9V1ALT1 ranges from 6.8V to 75V, depending on the specific part number.

  7. Can MMBZ9V1ALT1 be used for overvoltage protection?

    • Yes, MMBZ9V1ALT1 can be used for overvoltage protection by clamping the voltage at a predetermined level.

  8. Is MMBZ9V1ALT1 suitable for ESD protection?

    • Yes, MMBZ9V1ALT1 is suitable for providing Electrostatic Discharge (ESD) protection in electronic circuits.

  9. What are the key electrical characteristics of MMBZ9V1ALT1?

    • The key electrical characteristics include the zener voltage, reverse leakage current, and dynamic resistance.

  10. Where can I find detailed specifications and application notes for MMBZ9V1ALT1?

    • Detailed specifications and application notes for MMBZ9V1ALT1 can be found on the manufacturer's datasheet or website.