Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MMBZ5245BLT1
Introduction
The MMBZ5245BLT1 is a zener diode that belongs to the category of semiconductor devices. This component is commonly used in electronic circuits for voltage regulation and protection against overvoltage conditions. The MMBZ5245BLT1 possesses specific characteristics, packaging, and quantity details that make it suitable for various applications.
Basic Information Overview
- Category: Semiconductor device (Zener diode)
- Use: Voltage regulation and overvoltage protection
- Characteristics: Precise voltage regulation, low leakage current, small form factor
- Package: SOT-23
- Essence: Zener diode for voltage stabilization
- Packaging/Quantity: Available in tape and reel packaging, with quantities varying based on supplier and customer requirements
Specifications
- Voltage Range: 15V
- Power Dissipation: 350mW
- Operating Temperature Range: -65°C to +150°C
- Zener Impedance: 20Ω
- Maximum Reverse Leakage Current: 100nA
Detailed Pin Configuration
The MMBZ5245BLT1 zener diode has three pins: anode, cathode, and no-connect (NC). The pin configuration is as follows: - Anode (A) - Pin 1 - Cathode (K) - Pin 3 - No-connect (NC) - Pin 2
Functional Features
The primary function of the MMBZ5245BLT1 is to maintain a constant voltage across its terminals when operated in the reverse breakdown region. It exhibits a sharp breakdown voltage characteristic, ensuring precise regulation within the specified voltage range.
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- Low leakage current
- Small form factor
- Wide operating temperature range
Disadvantages
- Limited power dissipation capability
- Vulnerable to thermal runaway under high power conditions
Working Principles
When the MMBZ5245BLT1 is reverse-biased beyond its breakdown voltage, it allows current to flow, effectively stabilizing the voltage across its terminals. This behavior makes it suitable for applications requiring stable voltage references or protection against voltage spikes.
Detailed Application Field Plans
The MMBZ5245BLT1 finds extensive use in various electronic circuits and systems, including but not limited to: - Voltage regulators - Overvoltage protection circuits - Signal conditioning circuits - Power supplies - Sensor interfaces
Detailed and Complete Alternative Models
Several alternative models to the MMBZ5245BLT1 zener diode include: - BZX84C15LT1G - MMSZ5245BT1G - BZT52C15S-7-F
These alternatives offer similar voltage regulation and protection capabilities, catering to diverse design requirements.
In conclusion, the MMBZ5245BLT1 zener diode serves as a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its characteristics, specifications, and application versatility make it a valuable asset in modern electronics.
Word Count: 410
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MMBZ5245BLT1 trong giải pháp kỹ thuật
What is MMBZ5245BLT1?
- MMBZ5245BLT1 is a Zener diode with a voltage of 15V and a power dissipation of 200mW, commonly used for voltage regulation and protection in electronic circuits.
What are the typical applications of MMBZ5245BLT1?
- MMBZ5245BLT1 is commonly used in voltage regulation, overvoltage protection, and signal clamping in various technical solutions such as power supplies, communication equipment, and consumer electronics.
What is the maximum current that MMBZ5245BLT1 can handle?
- The maximum current for MMBZ5245BLT1 is typically around 20mA, making it suitable for low-power applications.
How does MMBZ5245BLT1 provide overvoltage protection?
- MMBZ5245BLT1 acts as a voltage clamp, conducting current when the voltage exceeds its breakdown voltage, thereby protecting downstream components from overvoltage damage.
Can MMBZ5245BLT1 be used for voltage regulation in power supplies?
- Yes, MMBZ5245BLT1 can be used to regulate voltage in low-power applications where a stable voltage reference is required.
What are the key electrical characteristics of MMBZ5245BLT1?
- The key electrical characteristics include a nominal Zener voltage of 15V, a maximum reverse leakage current of 100nA, and a temperature coefficient of approximately 0.05%/°C.
Is MMBZ5245BLT1 suitable for high-frequency applications?
- MMBZ5245BLT1 is not specifically designed for high-frequency applications, but it can be used in moderate-speed signal clamping and voltage regulation circuits.
What is the package type of MMBZ5245BLT1?
- MMBZ5245BLT1 is available in a small SOT-23 surface-mount package, making it suitable for compact and space-constrained designs.
Are there any alternative parts that can be used in place of MMBZ5245BLT1?
- Yes, other Zener diodes with similar voltage and power ratings, such as BZX84C15 or 1N4744A, can be used as alternatives to MMBZ5245BLT1.
What are the storage and operating temperature ranges for MMBZ5245BLT1?
- MMBZ5245BLT1 has a storage temperature range of -65°C to 150°C and an operating temperature range of -55°C to 150°C, making it suitable for a wide range of environmental conditions.