Microsemi Corporation
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MX1N8180
Xem chi tiết DataSheets

MX1N8180

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, small package size
Package: SOT-23-5
Essence: Regulates input voltage to a precise output voltage
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 1.8V
  • Dropout Voltage: 150mV at 100mA
  • Maximum Output Current: 150mA
  • Line Regulation: 0.05% typical
  • Load Regulation: 0.1% typical
  • Quiescent Current: 40µA typical
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. NC
  4. VIN
  5. EN

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages

  • High precision output voltage
  • Small package size
  • Wide input voltage range
  • Low dropout voltage
  • Low quiescent current

Disadvantages

  • Limited maximum output current
  • Limited operating temperature range

Working Principles

The MX1N8180 is a voltage regulator that maintains a stable output voltage even when the input voltage fluctuates. It achieves this by using a feedback mechanism to adjust the internal circuitry, ensuring a consistent output.

Detailed Application Field Plans

The MX1N8180 is suitable for various applications requiring a stable and precise voltage supply, such as: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Sensor modules

Detailed and Complete Alternative Models

  1. LM1117
  2. MCP1700
  3. AP2112
  4. XC6206

In conclusion, the MX1N8180 is a high-precision voltage regulator with a small package size, making it suitable for a wide range of applications in portable and battery-powered devices.

[Word count: 313]

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MX1N8180 trong giải pháp kỹ thuật

  1. What is MX1N8180?

    • MX1N8180 is a high-performance, low-power, and low-noise operational amplifier designed for use in a wide range of technical solutions.

  2. What are the key features of MX1N8180?

    • The key features of MX1N8180 include low input offset voltage, low input bias current, low noise, wide bandwidth, and low power consumption.

  3. In what applications can MX1N8180 be used?

    • MX1N8180 can be used in precision instrumentation, sensor signal conditioning, data acquisition systems, and audio processing applications.

  4. What is the typical supply voltage range for MX1N8180?

    • The typical supply voltage range for MX1N8180 is ±5V to ±15V.

  5. What is the input offset voltage of MX1N8180?

    • The input offset voltage of MX1N8180 is typically 150µV.

  6. What is the input bias current of MX1N8180?

    • The input bias current of MX1N8180 is typically 10pA.

  7. What is the typical noise performance of MX1N8180?

    • The typical noise performance of MX1N8180 is 8nV/√Hz at 1kHz.

  8. Can MX1N8180 operate in single-supply applications?

    • Yes, MX1N8180 can operate in single-supply applications with proper biasing and voltage levels.

  9. What is the unity-gain bandwidth of MX1N8180?

    • The unity-gain bandwidth of MX1N8180 is typically 10MHz.

  10. Is MX1N8180 suitable for battery-powered applications?

    • Yes, MX1N8180's low power consumption and wide supply voltage range make it suitable for battery-powered applications.