Xem thông số kỹ thuật để biết chi tiết sản phẩm.
JANTX2N3792 Transistor
Introduction
The JANTX2N3792 is a high-power NPN bipolar junction transistor (BJT) designed for general-purpose switching and amplifier applications. This entry provides an overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Product Overview
- Category: Electronic Component
- Use: General-purpose switching and amplifier applications
- Characteristics: High power, NPN BJT
- Package: TO-204AA (TO-3)
- Essence: Power transistor for high-current, high-voltage applications
- Packaging/Quantity: Typically sold individually or in small quantities
Specifications
- Maximum Collector-Emitter Voltage (Vce): 100V
- Maximum Collector Current (Ic): 30A
- DC Current Gain (hFE): 20 to 70
- Power Dissipation (Pd): 200W
- Operating Temperature Range: -65°C to 200°C
Pin Configuration
The JANTX2N3792 transistor has a standard TO-3 package with three leads: 1. Collector (C) 2. Base (B) 3. Emitter (E)
Functional Features
- High current and voltage capability
- Fast switching speed
- Low saturation voltage
Advantages
- Suitable for high-power applications
- Robust construction for reliability
- Wide operating temperature range
Disadvantages
- Relatively large package size
- Higher cost compared to smaller transistors
Working Principles
The JANTX2N3792 operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its collector and emitter terminals through the base terminal.
Application Field Plans
The JANTX2N3792 is commonly used in the following applications: - Power supplies - Motor control - Audio amplifiers - High-power switching circuits
Alternative Models
For applications requiring similar characteristics, alternative models to the JANTX2N3792 include: - 2N3055 - MJ15003 - TIP35C - MJE2955
In conclusion, the JANTX2N3792 transistor is a versatile component suitable for high-power switching and amplification tasks. Its robust design and high-performance characteristics make it a preferred choice in various electronic applications.
[Word Count: 324]
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng JANTX2N3792 trong giải pháp kỹ thuật
What is the JANTX2N3792 transistor used for?
- The JANTX2N3792 is a high-reliability, high-power NPN bipolar junction transistor commonly used in military and aerospace applications.
What are the key specifications of the JANTX2N3792 transistor?
- The JANTX2N3792 transistor typically has a maximum collector current of 10A, a maximum collector-emitter voltage of 80V, and a power dissipation of 150W.
Can the JANTX2N3792 be used in commercial applications?
- While it is designed for military and aerospace use, the JANTX2N3792 can also be used in certain high-reliability commercial applications where its ruggedness and reliability are required.
What are some common technical solutions that utilize the JANTX2N3792 transistor?
- The JANTX2N3792 is often used in power amplifiers, switching circuits, and other high-power applications where ruggedness and reliability are critical.
What are the temperature specifications for the JANTX2N3792 transistor?
- The JANTX2N3792 is typically rated for operation over a temperature range of -65°C to 200°C, making it suitable for harsh environments.
Is the JANTX2N3792 suitable for high-frequency applications?
- While the JANTX2N3792 is not specifically designed for high-frequency applications, it can still be used in certain RF power amplifier designs.
Are there any special considerations for mounting and heat dissipation with the JANTX2N3792?
- Proper heat sinking and thermal management are important for maximizing the performance and reliability of the JANTX2N3792, especially in high-power applications.
What are the typical failure modes of the JANTX2N3792 transistor?
- Common failure modes include thermal overstress, overcurrent, and voltage breakdown, so proper design and operating conditions are crucial for reliability.
Can the JANTX2N3792 be replaced with a commercial off-the-shelf (COTS) transistor?
- While COTS transistors may have similar electrical characteristics, they may not meet the same stringent reliability and ruggedness requirements as the JANTX2N3792.
Where can I find detailed technical information and application notes for the JANTX2N3792 transistor?
- Detailed technical information and application notes for the JANTX2N3792 can typically be found in the manufacturer's datasheets, application notes, and technical support resources.