Category: Integrated Circuit (IC)
Use: Memory storage and retrieval
Characteristics: - Non-volatile memory - Low power consumption - High data retention - Small form factor - I2C interface for easy integration
Package: SOP-8 (Small Outline Package)
Essence: The AT34C02D-MAHM-E is a 2-wire serial EEPROM (Electrically Erasable Programmable Read-Only Memory) IC that provides non-volatile storage of digital information. It is commonly used in various electronic devices for storing configuration settings, calibration data, and other small amounts of data.
Packaging/Quantity: The AT34C02D-MAHM-E is typically sold in reels containing 2500 units per reel.
The AT34C02D-MAHM-E has 8 pins arranged as follows:
``` ┌───┬───┐ │ 1 │ 8 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
Sure! Here are 10 common questions and answers related to the application of AT34C02D-MAHM-E in technical solutions:
Q: What is AT34C02D-MAHM-E? A: AT34C02D-MAHM-E is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by a particular company.
Q: What is the capacity of AT34C02D-MAHM-E? A: The AT34C02D-MAHM-E has a capacity of 2 kilobits, which is equivalent to 256 bytes.
Q: What is the operating voltage range for AT34C02D-MAHM-E? A: The operating voltage range for AT34C02D-MAHM-E is typically between 1.7V and 5.5V.
Q: What is the maximum clock frequency supported by AT34C02D-MAHM-E? A: The maximum clock frequency supported by AT34C02D-MAHM-E is 400 kHz.
Q: Can AT34C02D-MAHM-E be used for storing program code? A: No, AT34C02D-MAHM-E is primarily designed for storing small amounts of non-volatile data, such as configuration settings or calibration data.
Q: Is AT34C02D-MAHM-E compatible with I2C communication protocol? A: Yes, AT34C02D-MAHM-E supports the I2C (Inter-Integrated Circuit) communication protocol.
Q: Can AT34C02D-MAHM-E be used in automotive applications? A: Yes, AT34C02D-MAHM-E is designed to meet the requirements of automotive applications, including extended temperature ranges and high reliability.
Q: Does AT34C02D-MAHM-E have built-in write protection? A: Yes, AT34C02D-MAHM-E provides hardware write protection by using a dedicated pin or software write protection by sending specific commands.
Q: What is the typical endurance of AT34C02D-MAHM-E? A: The typical endurance of AT34C02D-MAHM-E is specified as 1 million write cycles.
Q: Can AT34C02D-MAHM-E operate in low-power modes? A: Yes, AT34C02D-MAHM-E supports various low-power modes, allowing it to minimize power consumption when not actively accessed.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.