AT28C64B-15SU-T

Product Overview

Category

AT28C64B-15SU-T belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

• Non-volatile: The stored data is retained even when power is removed.
• High capacity: The AT28C64B-15SU-T has a storage capacity of 64 kilobits (8 kilobytes).
• Fast access time: It operates with a maximum access time of 150 nanoseconds.
• Low power consumption: The device is designed to minimize power usage.
• Reliable: It offers high endurance and data retention capabilities.
• Easy integration: The AT28C64B-15SU-T can be easily integrated into various electronic systems.

Package

The AT28C64B-15SU-T is available in a surface mount package.

Essence

This product is an electrically erasable and programmable read-only memory (EEPROM) chip.

Packaging/Quantity

The AT28C64B-15SU-T is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Supply voltage: 2.7V to 5.5V
• Operating temperature range: -40°C to +85°C
• Input/output voltage levels compatible with both TTL and CMOS logic
• Organization: 8K x 8 bits
• Page size: 64 bytes
• Write cycle time: 10 milliseconds (typical)
• Data retention: 10 years (minimum)

Detailed Pin Configuration

The AT28C64B-15SU-T has a total of 28 pins. The pin configuration is as follows:

1. A0 - Address input
2. A1 - Address input
3. A2 - Address input
4. A3 - Address input
5. A4 - Address input
6. A5 - Address input
7. A6 - Address input
8. A7 - Address input
9. VCC - Power supply voltage
10. OE - Output enable
11. CE - Chip enable
12. WE - Write enable
13. I/O0 - Data input/output
14. I/O1 - Data input/output
15. I/O2 - Data input/output
16. I/O3 - Data input/output
17. I/O4 - Data input/output
18. I/O5 - Data input/output
19. I/O6 - Data input/output
20. I/O7 - Data input/output
21. NC - No connection
22. GND - Ground
23. NC - No connection
24. NC - No connection
25. NC - No connection
26. NC - No connection
27. NC - No connection
28. NC - No connection

Functional Features

• Byte-wise programmable: The AT28C64B-15SU-T allows individual bytes to be programmed or erased.
• High-speed operation: It supports fast read and write operations.
• Software and hardware data protection: The device provides mechanisms to protect the stored data from accidental modification.
• Low power consumption: The AT28C64B-15SU-T is designed to minimize power usage, making it suitable for battery-powered applications.

Advantages and Disadvantages

Advantages

• Non-volatile memory ensures data retention even during power loss.
• High storage capacity for various applications.
• Fast access time enables quick data retrieval.
• Easy integration into electronic systems.
• Reliable performance with high endurance and data retention capabilities.

Disadvantages

• Limited storage capacity compared to other memory technologies.
• Relatively slower write cycle time compared to some alternatives.
• Higher cost per bit compared to certain memory options.

Working Principles

The AT28C64B-15SU-T utilizes EEPROM technology, which allows for the electrical erasure and programming of data. It consists of a grid of memory cells that can be individually programmed or erased using specific voltage levels. The stored data is retained even when power is removed, making it non-volatile in nature.

Detailed Application Field Plans

The AT28C64B-15SU-T finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Industrial control systems - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models to the AT28C64B-15SU-T include: - AT28C64B-15PU: A similar device with a different package type (DIP instead of surface mount). - AT28C256-15SU: A higher capacity EEPROM chip with 256 kilobits storage. - AT29C010A-12PC: A flash memory chip with 1 megabit storage