LTC6907CS6#TRPBF

Product Overview

Category

LTC6907CS6#TRPBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for generating precise clock signals.

Characteristics

• Package: SOT-23-6
• Essence: Precision oscillator with programmable frequency
• Packaging/Quantity: Tape & Reel, 3000 pieces per reel

Specifications

The LTC6907CS6#TRPBF has the following specifications:

• Supply Voltage Range: 2.7V to 5.5V
• Frequency Range: 1kHz to 20MHz
• Frequency Accuracy: ±0.25%
• Programmable Frequency Steps: 1, 10, or 100
• Output Duty Cycle: 50% ±5%
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The LTC6907CS6#TRPBF has a total of six pins arranged as follows:

```

---

| | --| VDD GND |-- Pin 1: Ground --| FOUT NC |-- Pin 2: No Connection --| FSEL CLK |-- Pin 3: Clock Input --| FS NC |-- Pin 4: No Connection --| GND VDD |-- Pin 5: Power Supply |___________| ```

Functional Features

• Programmable frequency selection using external resistors
• Wide frequency range with high accuracy
• Low power consumption
• Small form factor package for space-constrained applications

Advantages and Disadvantages

Advantages

• Precise frequency generation
• Easy frequency selection through external resistors
• Wide operating voltage range
• Compact package size

Disadvantages

• Limited frequency range compared to some other oscillators
• No built-in frequency adjustment capability

Working Principles

The LTC6907CS6#TRPBF is a precision oscillator that generates clock signals with programmable frequencies. The desired frequency can be set by connecting external resistors to the FSEL and CLK pins. The internal circuitry of the LTC6907CS6#TRPBF then generates an accurate clock signal based on the resistor values.

Detailed Application Field Plans

The LTC6907CS6#TRPBF finds applications in various electronic devices where precise clock signals are required. Some specific application fields include:

1. Communication Systems: Used for synchronization and timing purposes in wireless communication systems.
2. Test and Measurement Equipment: Provides accurate timing signals for data acquisition, waveform generation, and signal analysis.
3. Industrial Automation: Used in control systems for precise timing and synchronization of processes.
4. Medical Devices: Provides clock signals for timing critical operations in medical equipment such as patient monitors and diagnostic devices.
5. Consumer Electronics: Used in audio/video equipment, gaming consoles, and other consumer devices requiring accurate timing.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the LTC6907CS6#TRPBF include:

1. MAX7375AXR285-T: Precision oscillator with programmable frequency range and small form factor package.
2. AD9548BCPZ: Clock generator with wide frequency range and integrated frequency adjustment capabilities.
3. SiT8008AI-13-33E-25.000000: Programmable MEMS oscillator with high accuracy and low power consumption.

These alternative models provide options for different frequency ranges, package sizes, and additional features based on specific application requirements.

Word count: 409 words