X40411V8I-AT1

Product Overview

Category: Integrated Circuit (IC)

Use: X40411V8I-AT1 is a specialized integrated circuit used for data storage and retrieval in electronic devices.

Characteristics: - High-speed performance - Low power consumption - Compact size - Reliable data retention

Package: X40411V8I-AT1 is available in a compact surface-mount package, making it suitable for use in various electronic devices.

Essence: X40411V8I-AT1 is an essential component in electronic systems that require non-volatile memory for storing critical data.

Packaging/Quantity: The X40411V8I-AT1 is typically packaged in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications

• Memory Capacity: 4 megabits (512 kilobytes)
• Interface: Serial Peripheral Interface (SPI)
• Operating Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Data Retention: Up to 100 years
• Write Endurance: 1 million cycles

Detailed Pin Configuration

The X40411V8I-AT1 has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply Voltage | | 2 | GND | Ground | | 3 | CS | Chip Select | | 4 | SCK | Serial Clock | | 5 | SI | Serial Input | | 6 | SO | Serial Output | | 7 | WP | Write Protect | | 8 | HOLD | Hold Input |

Functional Features

• Non-volatile data storage
• High-speed data transfer using SPI interface
• Low power consumption in both active and standby modes
• Write protection feature to prevent accidental modification of stored data
• Hold input for pausing ongoing operations without losing data

Advantages and Disadvantages

Advantages: - Fast data transfer rate - Compact size allows for integration into small electronic devices - Reliable data retention even in harsh environmental conditions - Low power consumption extends battery life in portable devices

Disadvantages: - Limited storage capacity compared to other memory technologies - Relatively higher cost per megabit compared to larger capacity memory chips

Working Principles

The X40411V8I-AT1 utilizes flash memory technology to store and retrieve data. It employs the Serial Peripheral Interface (SPI) protocol for communication with the host device. The IC operates by sending commands and data through the SPI interface, allowing for high-speed data transfer between the host and the memory chip. The non-volatile nature of flash memory ensures that data remains intact even when power is disconnected.

Detailed Application Field Plans

The X40411V8I-AT1 finds applications in various electronic devices, including but not limited to: - Consumer electronics (e.g., smartphones, tablets, digital cameras) - Automotive systems (e.g., infotainment systems, instrument clusters) - Industrial control systems - Medical devices - Communication equipment

Detailed and Complete Alternative Models

1. X40411V8I-BT1: Similar to X40411V8I-AT1, but with extended temperature range (-40°C to +105°C).
2. X40411V8I-CT1: Higher capacity version with 8 megabits (1 megabyte) of memory.
3. X40411V8I-DT1: Lower power variant with reduced standby current consumption.

These alternative models offer flexibility in terms of temperature range, capacity, and power consumption to cater to specific application requirements.

Note: The content provided above is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.