Xem thông số kỹ thuật để biết chi tiết sản phẩm.
IRFBA1404PPBF
Product Overview
- Category: Power MOSFET
- Use: Switching applications in power supplies, motor control, and other high current applications
- Characteristics: High voltage capability, low on-resistance, fast switching speed
- Package: TO-220AB
- Essence: Efficient power switching
- Packaging/Quantity: Available in reels of 1000 units
Specifications
- Voltage Rating: 40V
- Current Rating: 162A
- On-Resistance: 1.4mΩ
- Gate Charge: 110nC
- Operating Temperature: -55°C to 175°C
Detailed Pin Configuration
- Pin 1 (G): Gate
- Pin 2 (D): Drain
- Pin 3 (S): Source
Functional Features
- Fast switching speed for improved efficiency
- Low on-resistance for reduced power dissipation
- High current handling capability for demanding applications
Advantages
- High voltage capability
- Low on-resistance
- Fast switching speed
Disadvantages
- Sensitive to static electricity
- Requires careful handling during assembly
Working Principles
The IRFBA1404PPBF operates based on the principles of field-effect transistors, utilizing the control of an electric field to modulate the conductivity of the device.
Detailed Application Field Plans
- Power supplies
- Motor control systems
- High current switching applications
Detailed and Complete Alternative Models
- IRFB4110PbF
- IRFB7434PbF
- IRFB4227PbF
This MOSFET is widely used in various applications due to its high voltage capability, low on-resistance, and fast switching speed. It is suitable for power supplies, motor control, and high current applications. However, it requires careful handling due to its sensitivity to static electricity. Alternative models such as IRFB4110PbF, IRFB7434PbF, and IRFB4227PbF offer similar performance and can be considered based on specific application requirements.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng IRFBA1404PPBF trong giải pháp kỹ thuật
What is the IRFBA1404PPBF?
- The IRFBA1404PPBF is a power MOSFET transistor designed for high-speed switching applications in power supplies, motor control, and other electronic systems.
What is the maximum voltage and current rating of the IRFBA1404PPBF?
- The IRFBA1404PPBF has a maximum voltage rating of 40V and a continuous drain current rating of 162A.
What are the typical applications of the IRFBA1404PPBF?
- Typical applications include DC-DC converters, motor drives, uninterruptible power supplies (UPS), and electronic load switches.
What are the key features of the IRFBA1404PPBF?
- The IRFBA1404PPBF features low on-state resistance, fast switching speed, and rugged construction for reliable performance in demanding environments.
What is the thermal resistance of the IRFBA1404PPBF?
- The thermal resistance of the IRFBA1404PPBF is typically 0.5°C/W, allowing for efficient heat dissipation in high-power applications.
Does the IRFBA1404PPBF require a heatsink for operation?
- Yes, for high-current or high-power applications, it is recommended to use a suitable heatsink to maintain the transistor within its safe operating temperature range.
What is the gate-source voltage required to drive the IRFBA1404PPBF?
- The gate-source voltage required is typically around 10V to ensure full enhancement of the MOSFET.
Can the IRFBA1404PPBF be used in automotive applications?
- Yes, the IRFBA1404PPBF is suitable for automotive applications such as motor control, power distribution, and battery management systems.
What protection features does the IRFBA1404PPBF offer?
- The IRFBA1404PPBF provides built-in protection against overcurrent, overvoltage, and thermal overload, enhancing system reliability.
Where can I find detailed technical specifications and application notes for the IRFBA1404PPBF?
- Detailed technical specifications and application notes can be found in the datasheet provided by the manufacturer or on their official website.