Infineon Technologies
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
IRF9540NSTRRPBF
Xem chi tiết DataSheets

IRF9540NSTRRPBF

Product Overview

  • Category: Power MOSFET
  • Use: Switching and amplification in power electronics applications
  • Characteristics: High voltage, high speed, low on-resistance
  • Package: TO-263 (D2PAK)
  • Essence: N-channel power MOSFET
  • Packaging/Quantity: Tape & Reel, 800 units per reel

Specifications

  • Drain-Source Voltage (VDSS): 100V
  • Continuous Drain Current (ID): 23A
  • On-Resistance (RDS(on)): 0.117Ω
  • Gate-Source Voltage (VGS): ±20V
  • Power Dissipation (PD): 94W

Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Fast switching speed
  • Low gate drive power
  • Avalanche energy specified
  • Improved dv/dt capability

Advantages

  • High input impedance
  • Low input capacitance
  • Good thermal stability
  • Reliable and rugged

Disadvantages

  • Sensitivity to electrostatic discharge
  • Limited maximum current rating

Working Principles

The IRF9540NSTRRPBF operates based on the principle of field-effect transistors, where the flow of current between the drain and source terminals is controlled by the voltage applied to the gate terminal.

Application Field Plans

  1. Switching Power Supplies: Used for efficient power conversion in various electronic devices.
  2. Motor Control: Enables precise control of motor speed and direction in industrial applications.
  3. Electronic Ballasts: Utilized for driving fluorescent lamps with improved efficiency.

Alternative Models

  1. IRF540N: Similar specifications, lower voltage rating
  2. IRF840: Higher current rating, similar package
  3. IRF3205: Lower on-resistance, higher current handling capacity

This comprehensive entry provides an in-depth understanding of the IRF9540NSTRRPBF, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng IRF9540NSTRRPBF trong giải pháp kỹ thuật

  1. What is the IRF9540NSTRRPBF?

    • The IRF9540NSTRRPBF is a power MOSFET transistor designed for high-speed switching applications in power supplies, converters, and motor control circuits.

  2. What is the maximum drain-source voltage of the IRF9540NSTRRPBF?

    • The maximum drain-source voltage of the IRF9540NSTRRPBF is 100V.

  3. What is the continuous drain current rating of the IRF9540NSTRRPBF?

    • The continuous drain current rating of the IRF9540NSTRRPBF is 23A.

  4. What is the on-state resistance (RDS(on)) of the IRF9540NSTRRPBF?

    • The on-state resistance of the IRF9540NSTRRPBF is typically around 0.117 ohms.

  5. What are the typical applications of the IRF9540NSTRRPBF?

    • The IRF9540NSTRRPBF is commonly used in applications such as power supplies, DC-DC converters, motor control, and electronic load switches.

  6. What is the gate-source voltage range for proper operation of the IRF9540NSTRRPBF?

    • The gate-source voltage range for proper operation of the IRF9540NSTRRPBF is typically between -20V and +20V.

  7. Does the IRF9540NSTRRPBF require a heatsink for operation?

    • Yes, for high-power applications or when operating at high currents, it is recommended to use a heatsink to dissipate heat effectively.

  8. What is the operating temperature range of the IRF9540NSTRRPBF?

    • The IRF9540NSTRRPBF can operate within a temperature range of -55°C to 175°C.

  9. Can the IRF9540NSTRRPBF be used for PWM (Pulse Width Modulation) applications?

    • Yes, the IRF9540NSTRRPBF is suitable for PWM applications due to its fast switching characteristics.

  10. Is the IRF9540NSTRRPBF RoHS compliant?

    • Yes, the IRF9540NSTRRPBF is RoHS compliant, making it suitable for use in environmentally friendly electronic products.