Xem thông số kỹ thuật để biết chi tiết sản phẩm.
8N4DV85FC-0109CDI
Basic Information Overview
- Category: Electronic Component
- Use: Integrated Circuit
- Characteristics: High-performance, Low-power consumption
- Packaging: Surface Mount Technology (SMT)
- Essence: Voltage-controlled crystal oscillator (VCXO)
- Packaging/Quantity: Tape and Reel / 1000 units per reel
Specification Parameters
- Frequency Range: 10MHz - 50MHz
- Supply Voltage: 3.3V ±5%
- Output Logic: CMOS
- Operating Temperature: -40°C to +85°C
- Frequency Stability: ±25ppm
- Aging: ±3ppm per year
- Phase Noise: -120dBc/Hz @ 10kHz offset
Pin Configuration
The 8N4DV85FC-0109CDI has a total of 6 pins arranged as follows: 1. VCC: Power supply input 2. GND: Ground reference 3. OE: Output enable control 4. OUT: Output signal 5. NC: No connection 6. VC: Voltage control input
Functional Characteristics
- The 8N4DV85FC-0109CDI is a voltage-controlled crystal oscillator designed for precise frequency control in electronic circuits.
- It provides a stable output frequency that can be adjusted by applying a voltage to the VC pin.
- The output signal is in CMOS logic format, making it compatible with various digital systems.
- The OE pin allows for easy enable/disable control of the output signal.
Advantages and Disadvantages
Advantages: - High-performance crystal oscillator with excellent frequency stability. - Low power consumption, suitable for battery-powered devices. - Wide operating temperature range for reliable operation in various environments.
Disadvantages: - Limited frequency range compared to some other VCXO models. - Requires external voltage control for frequency adjustment.
Working Principle
The 8N4DV85FC-0109CDI utilizes a crystal resonator and a voltage-controlled oscillator circuit to generate a precise output frequency. The voltage applied to the VC pin controls the oscillation frequency, allowing fine-tuning of the output signal.
Detailed Application Field Plans
The 8N4DV85FC-0109CDI is commonly used in various electronic systems that require accurate frequency control. Some typical application fields include: 1. Telecommunications equipment 2. Networking devices 3. Test and measurement instruments 4. Industrial automation systems 5. Consumer electronics
Detailed Alternative Models
- 8N4DV85FC-0110CDI: Similar specifications with a different frequency range (10MHz - 100MHz).
- 8N4DV85FC-0109CDJ: Same frequency range but with LVPECL output logic.
This concludes the encyclopedia entry for 8N4DV85FC-0109CDI.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng 8N4DV85FC-0109CDI trong giải pháp kỹ thuật
Question: What is the purpose of 8N4DV85FC-0109CDI in technical solutions?
Answer: 8N4DV85FC-0109CDI is a high-performance voltage-controlled crystal oscillator (VCXO) used for frequency control in various technical applications.Question: What are the key features of 8N4DV85FC-0109CDI?
Answer: The key features of 8N4DV85FC-0109CDI include low phase noise, wide frequency range, and excellent temperature stability.Question: How is 8N4DV85FC-0109CDI typically integrated into technical solutions?
Answer: 8N4DV85FC-0109CDI is commonly integrated into communication systems, test and measurement equipment, and other electronic devices requiring precise frequency control.Question: What frequency range does 8N4DV85FC-0109CDI support?
Answer: 8N4DV85FC-0109CDI supports a wide frequency range, typically from a few megahertz to several hundred megahertz.Question: Can 8N4DV85FC-0109CDI be customized for specific technical requirements?
Answer: Yes, 8N4DV85FC-0109CDI can be customized to meet specific frequency, voltage, and stability requirements for different technical solutions.Question: What are the environmental operating conditions for 8N4DV85FC-0109CDI?
Answer: 8N4DV85FC-0109CDI is designed to operate within specified temperature, humidity, and vibration ranges, making it suitable for various environmental conditions.Question: How does 8N4DV85FC-0109CDI contribute to overall system performance in technical solutions?
Answer: 8N4DV85FC-0109CDI contributes to improved system performance by providing stable and accurate frequency control, which is crucial for many technical applications.Question: Are there any application notes or technical resources available for integrating 8N4DV85FC-0109CDI?
Answer: Yes, application notes and technical resources are available to assist with the integration and optimization of 8N4DV85FC-0109CDI in specific technical solutions.Question: What are the typical power requirements for 8N4DV85FC-0109CDI?
Answer: 8N4DV85FC-0109CDI typically operates on low power supply voltages, making it suitable for energy-efficient technical solutions.Question: Can 8N4DV85FC-0109CDI be used in wireless communication systems?
Answer: Yes, 8N4DV85FC-0109CDI is commonly used in wireless communication systems to provide precise frequency control for reliable signal transmission and reception.