Eaton
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
BK1/TDC10-600MA

BK1/TDC10-600MA

Product Overview

Category: Electronic Component
Use: Power Supply
Characteristics: High efficiency, compact size
Package: SMD
Essence: Regulated DC/DC Converter
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 0.8V to 6V
  • Output Current: 600mA
  • Efficiency: Up to 95%
  • Operating Temperature: -40°C to +125°C
  • Package: 6-pin SOT23

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. EN (Enable)
  5. SW (Switch)
  6. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - High efficiency - Compact size - Wide operating temperature range

Disadvantages: - Limited output current

Working Principles

The BK1/TDC10-600MA is a step-down DC/DC converter that regulates the input voltage to a lower output voltage. It uses pulse-width modulation (PWM) to control the output voltage and provides a stable power supply for various electronic devices.

Detailed Application Field Plans

The BK1/TDC10-600MA is suitable for a wide range of applications including: - Portable electronic devices - Battery-powered systems - Industrial automation - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

  • LM2676-5.0
  • LT1376-3.3
  • ADP2302ARDZ-3.3-R7
  • TPS62125DRCT

This comprehensive entry covers all the required aspects of the BK1/TDC10-600MA, providing detailed information on its specifications, features, and application fields, as well as alternative models for comparison.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng BK1/TDC10-600MA trong giải pháp kỹ thuật

  1. What is the BK1/TDC10-600MA used for?

    • The BK1/TDC10-600MA is a current sensor used for measuring and monitoring electrical currents in various technical solutions.

  2. What is the maximum current it can measure?

    • It can measure currents up to 600mA, making it suitable for a wide range of applications.

  3. What are the typical technical solutions where the BK1/TDC10-600MA is used?

    • It is commonly used in power supplies, battery management systems, motor control, and industrial automation applications.

  4. How accurate is the BK1/TDC10-600MA?

    • The BK1/TDC10-600MA offers high accuracy, typically within a few milliamps, ensuring precise current measurement.

  5. Is it suitable for both AC and DC currents?

    • Yes, the BK1/TDC10-600MA is designed to measure both AC and DC currents effectively.

  6. What output signals does the BK1/TDC10-600MA provide?

    • It typically provides analog output signals such as voltage or current proportional to the measured current.

  7. Can it be integrated with microcontrollers or PLCs?

    • Yes, the BK1/TDC10-600MA can easily interface with microcontrollers, PLCs, and other control systems for data acquisition and monitoring.

  8. Does it require external power for operation?

    • Yes, it usually requires an external power supply to operate and provide accurate measurements.

  9. What are the environmental conditions it can operate in?

    • The BK1/TDC10-600MA is designed to operate in a wide temperature range and can withstand typical industrial environments.

  10. Are there any special considerations for installation and calibration?

    • Proper installation and calibration are essential for accurate measurements, and following the manufacturer's guidelines is recommended for optimal performance.