Diodes Incorporated
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
SBR20A200CTB-13
Xem chi tiết DataSheets

SBR20A200CTB-13

Product Overview

Category

The SBR20A200CTB-13 belongs to the category of semiconductor devices.

Use

It is commonly used in electronic circuits and power supply applications.

Characteristics

  • High voltage capability
  • Fast switching speed
  • Low on-state voltage drop

Package

The SBR20A200CTB-13 is typically available in a TO-220AB package.

Essence

This product is essential for efficient power management and voltage regulation in various electronic systems.

Packaging/Quantity

The SBR20A200CTB-13 is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Voltage: 200V
  • Average Forward Current: 20A
  • Reverse Recovery Time: <50ns
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The SBR20A200CTB-13 typically has three pins: 1. Anode 2. Cathode 3. Gate

Functional Features

  • Low reverse recovery current
  • High surge capability
  • Excellent thermal performance

Advantages and Disadvantages

Advantages

  • Reduced power loss
  • Enhanced efficiency in power conversion
  • Improved system reliability

Disadvantages

  • Higher cost compared to traditional diodes
  • Sensitivity to overvoltage conditions

Working Principles

The SBR20A200CTB-13 operates based on the Schottky barrier rectification principle, providing low forward voltage drop and fast switching characteristics.

Detailed Application Field Plans

The SBR20A200CTB-13 is widely used in: - Switching power supplies - DC-DC converters - Inverters - Motor control systems

Detailed and Complete Alternative Models

Some alternative models to the SBR20A200CTB-13 include: - SBR10A200CTB-13 - SBR30A200CTB-13 - SBR20A150CTB-13

Note: The above list is not exhaustive and may vary based on specific application requirements.

This comprehensive entry provides an in-depth understanding of the SBR20A200CTB-13, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng SBR20A200CTB-13 trong giải pháp kỹ thuật

  1. What is the SBR20A200CTB-13 used for in technical solutions?

    • The SBR20A200CTB-13 is a Schottky barrier rectifier diode commonly used for power supply, lighting, and motor control applications.

  2. What are the key specifications of the SBR20A200CTB-13?

    • The SBR20A200CTB-13 has a maximum average forward current of 20A, a reverse voltage of 200V, and a low forward voltage drop.

  3. How does the SBR20A200CTB-13 compare to other rectifier diodes?

    • The SBR20A200CTB-13 offers lower forward voltage drop and faster switching compared to standard silicon diodes.

  4. Can the SBR20A200CTB-13 be used in high-frequency applications?

    • Yes, the SBR20A200CTB-13 is suitable for high-frequency switching due to its fast recovery time and low capacitance.

  5. What are the typical applications of the SBR20A200CTB-13 in power supplies?

    • The SBR20A200CTB-13 is commonly used in AC-to-DC converters, DC-to-DC converters, and voltage regulation circuits.

  6. Does the SBR20A200CTB-13 require heatsinking in high-power applications?

    • Yes, in high-power applications, proper heatsinking is recommended to ensure optimal performance and reliability.

  7. What are the temperature considerations for the SBR20A200CTB-13?

    • The SBR20A200CTB-13 has a wide operating temperature range, but it's important to stay within the specified limits for best results.

  8. Can the SBR20A200CTB-13 be used in automotive electronics?

    • Yes, the SBR20A200CTB-13 is suitable for automotive applications such as LED lighting, motor drives, and battery management systems.

  9. Are there any common failure modes associated with the SBR20A200CTB-13?

    • Common failure modes include thermal overstress, reverse voltage breakdown, and excessive current leading to junction damage.

  10. What are some best practices for incorporating the SBR20A200CTB-13 into technical solutions?

    • Best practices include proper PCB layout, attention to thermal management, and adherence to manufacturer's application notes and guidelines.