Diodes Incorporated
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
DFLT6V5A-7
Xem chi tiết DataSheets

DFLT6V5A-7

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Low dropout, 6.5V output, 5A current capacity
Package: TO-252-3
Essence: Regulates input voltage to a stable 6.5V output
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 7V to 26V
  • Output Voltage: 6.5V ±2%
  • Dropout Voltage: 0.5V at 5A
  • Quiescent Current: 1.5mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input)
  2. GND (Ground)
  3. Vout (Output)

Functional Features

  • Low dropout voltage for efficient regulation
  • High current capacity of 5A
  • Wide input voltage range for versatile applications

Advantages and Disadvantages

Advantages: - Stable output voltage - Suitable for low voltage applications - High current handling capability

Disadvantages: - Higher dropout voltage compared to some alternatives - Limited operating temperature range

Working Principles

The DFLT6V5A-7 utilizes a series pass element to regulate the output voltage. When the input voltage is within the specified range, the device maintains a constant 6.5V output by adjusting the internal resistance.

Detailed Application Field Plans

  1. Automotive Electronics: Powering sensors and actuators in vehicles
  2. Industrial Control Systems: Providing stable voltage for control circuitry
  3. Consumer Electronics: Regulating voltage for audio amplifiers and LED lighting

Detailed and Complete Alternative Models

  1. LM2940CT-6.5/NOPB
  2. MIC2940A-6.5WS

This comprehensive entry provides an in-depth understanding of the DFLT6V5A-7, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng DFLT6V5A-7 trong giải pháp kỹ thuật

  1. What is the DFLT6V5A-7 used for?

    • The DFLT6V5A-7 is a transient voltage suppressor diode designed to protect sensitive electronic components from voltage spikes and transients.

  2. What is the maximum voltage rating of the DFLT6V5A-7?

    • The DFLT6V5A-7 has a maximum voltage rating of 6.5V.

  3. What is the maximum current rating of the DFLT6V5A-7?

    • The DFLT6V5A-7 has a maximum current rating of 7A.

  4. How does the DFLT6V5A-7 protect electronic circuits?

    • The DFLT6V5A-7 clamps the voltage across the protected circuit to a safe level, diverting excess current away from sensitive components.

  5. Can the DFLT6V5A-7 be used in automotive applications?

    • Yes, the DFLT6V5A-7 is suitable for use in automotive electronics to protect against voltage surges.

  6. What is the response time of the DFLT6V5A-7?

    • The response time of the DFLT6V5A-7 is very fast, typically in the nanosecond range.

  7. Is the DFLT6V5A-7 polarity sensitive?

    • No, the DFLT6V5A-7 is not polarity sensitive and can be connected in either direction.

  8. Can the DFLT6V5A-7 be used in high-frequency applications?

    • Yes, the DFLT6V5A-7 is suitable for use in high-frequency applications due to its fast response time.

  9. What are the typical applications of the DFLT6V5A-7?

    • The DFLT6V5A-7 is commonly used in power supplies, communication equipment, and industrial control systems.

  10. Does the DFLT6V5A-7 require any external components for proper operation?

    • In most cases, the DFLT6V5A-7 can be used standalone, but additional circuit protection components may be recommended depending on the specific application requirements.