S29GL128S90FHSS60

Product Overview

Category

The S29GL128S90FHSS60 belongs to the category of flash memory devices.

Use

It is primarily used for data storage in various electronic devices, such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

• High storage capacity: The S29GL128S90FHSS60 offers a storage capacity of 128 gigabits (16 gigabytes), allowing for ample data storage.
• Fast data transfer rate: With a high-speed interface, this flash memory device enables quick read and write operations.
• Reliable performance: It ensures reliable data retention and endurance, making it suitable for long-term use.
• Low power consumption: The S29GL128S90FHSS60 is designed to consume minimal power, enhancing battery life in portable devices.

Package

This flash memory device comes in a compact package, which is typically a small form factor integrated circuit (IC) chip.

Essence

The essence of the S29GL128S90FHSS60 lies in its ability to provide high-capacity and reliable data storage in electronic devices.

Packaging/Quantity

The S29GL128S90FHSS60 is usually packaged individually or in reels, depending on the manufacturer's specifications. The quantity per package may vary, but commonly ranges from a few units to hundreds or thousands.

Specifications

• Memory Type: Flash
• Capacity: 128 gigabits (16 gigabytes)
• Interface: Serial Peripheral Interface (SPI)
• Voltage Supply: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Data Transfer Rate: Up to 90 megabytes per second (MB/s)
• Erase/Program Cycle Endurance: 100,000 cycles

Detailed Pin Configuration

The S29GL128S90FHSS60 has a specific pin configuration, which facilitates its integration into electronic devices. The detailed pin configuration is as follows:

1. VCC: Power supply voltage
2. GND: Ground reference
3. /CE: Chip enable (active low)
4. /OE: Output enable (active low)
5. /WE: Write enable (active low)
6. A0-A23: Address inputs
7. DQ0-DQ15: Data input/output lines
8. /RP: Ready/Busy status output
9. /RESET: Reset input (active low)

Functional Features

• High-speed data transfer: The S29GL128S90FHSS60 supports fast read and write operations, enabling efficient data access.
• Reliable data storage: It ensures reliable data retention, preventing data loss or corruption over time.
• Flexible interface: The Serial Peripheral Interface (SPI) allows for easy integration with various electronic devices.
• Sector erase capability: This flash memory device supports sector-based erasure, allowing selective data removal without affecting the entire memory.

Advantages and Disadvantages

Advantages

• Large storage capacity
• Fast data transfer rate
• Low power consumption
• Reliable performance
• Compact form factor

Disadvantages

• Relatively high cost compared to lower-capacity flash memory options
• Limited compatibility with certain legacy systems that do not support SPI interface

Working Principles

The S29GL128S90FHSS60 utilizes NAND flash memory technology. It stores data in memory cells organized in a grid-like structure. Each cell can store multiple bits of information using different voltage levels. When data is written, the memory controller applies appropriate voltages to program the cells. During read operations, the stored voltages are interpreted to retrieve the stored data.

Detailed Application Field Plans

The S29GL128S90FHSS60 finds application in various electronic devices, including: - Smartphones and tablets - Digital cameras - Solid-state drives (SSDs) - Portable media players - Automotive infotainment systems

Detailed and Complete Alternative Models

1. S29GL064S90FHSS33: 64 gigabit (8 gigabyte) flash memory with similar specifications.
2. S29GL256S90FHSS70: 256 gigabit (32 gigabyte) flash memory with higher storage capacity.
3. S29GL512S90FHSS80: 512 gigabit (64 gigabyte) flash memory with even higher storage capacity.

These alternative models offer varying capacities to suit different storage requirements.

(Note: The word count of the above content is 529 words)