S29GL128S11DHIV20

Product Overview

Category

The S29GL128S11DHIV20 belongs to the category of flash memory devices.

Use

It is primarily used for data storage in various electronic devices, such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

• Non-volatile: The S29GL128S11DHIV20 retains data even when power is turned off.
• High capacity: It offers a storage capacity of 128 gigabits (16 gigabytes).
• High-speed data transfer: The device supports fast read and write operations, enabling quick access to stored data.
• Reliable: It has a high endurance rating and can withstand numerous read and write cycles.
• Low power consumption: The S29GL128S11DHIV20 is designed to consume minimal power during operation.
• Compact package: It comes in a small form factor, making it suitable for integration into compact electronic devices.

Package and Quantity

The S29GL128S11DHIV20 is typically packaged in a surface-mount package, such as a ball grid array (BGA) or a quad flat package (QFP). The exact package type may vary depending on the manufacturer. The quantity of devices per package also varies, but it is commonly available as a single unit.

Specifications

• Storage Capacity: 128 gigabits (16 gigabytes)
• Interface: Parallel or Serial
• Voltage Range: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Data Transfer Speed: Up to 100 megabytes per second (depending on the interface)

Pin Configuration

The S29GL128S11DHIV20 has a specific pin configuration that enables its proper functioning within a circuit. The detailed pin configuration is as follows:

1. VCC: Power supply voltage
2. GND: Ground reference
3. A0-A23: Address inputs for selecting memory locations
4. DQ0-DQ15: Data input/output lines
5. WE#: Write enable control signal
6. CE#: Chip enable control signal
7. OE#: Output enable control signal
8. RP#/BYTE#: Reset/byte enable control signal
9. RY/BY#: Ready/busy status output
10. WP#/ACC: Write protect or accelerated programming control signal
11. RESET#: External reset control signal
12. VPP: Programming voltage supply (for some programming modes)

Note: The pin configuration may vary slightly depending on the specific package type.

Functional Features

The S29GL128S11DHIV20 offers several functional features that enhance its usability and performance:

1. High-speed Read/Write Operations: The device supports fast data transfer, allowing for quick access to stored information.
2. Block Erase Capability: It enables erasing large blocks of data simultaneously, improving efficiency.
3. Error Correction Code (ECC): The S29GL128S11DHIV20 incorporates ECC algorithms to detect and correct errors during data retrieval.
4. Security Features: Some versions of the device include security features like password protection and encryption to safeguard sensitive data.
5. Low Power Consumption: The flash memory device is designed to minimize power consumption, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

• Large storage capacity
• Fast data transfer speed
• Reliable and durable
• Compact form factor
• Low power consumption

Disadvantages

• Relatively higher cost compared to other types of memory
• Limited write endurance (compared to read operations)
• Susceptible to data loss in case of power failure during write operations

Working Principles

The S29GL128S11DHIV20 utilizes the principles of NAND flash memory technology. It stores data in a grid-like structure of memory cells, where each cell can hold multiple bits of information. The device uses electrical charges to represent binary data (0s and 1s). During write operations, the charges are stored in the memory cells, while read operations retrieve the stored charges to reconstruct the original data.

Application Field Plans

The S29GL128S11DHIV20 finds applications in various electronic devices that require non-volatile storage with high capacity and fast access times. Some potential application fields include:

1. Smartphones and Tablets: The flash memory device provides ample storage for apps, media files, and user data.
2. Digital Cameras: It enables storing high-resolution photos and videos.
3. Solid-State Drives (SSDs): The S29GL128S11DHIV20 serves as the primary storage medium in SSDs, offering fast boot times and data transfer rates.
4. Industrial Control Systems: It is used for storing critical data in industrial automation and control systems.
5. Automotive Electronics: The device is suitable for automotive