Xem thông số kỹ thuật để biết chi tiết sản phẩm.
S25FL164K0XBHVS30
Basic Information Overview
- Category: Flash Memory
- Use: Data storage and retrieval in electronic devices
- Characteristics:
- Non-volatile memory
- High-speed read and write operations
- Low power consumption
- Wide temperature range (-40°C to +85°C)
- Package: 8-contact WSON package
- Essence: Reliable and efficient data storage solution
- Packaging/Quantity: Available in reels of 2500 units
Specifications
- Memory Size: 16 Megabits (2 Megabytes)
- Interface: Serial Peripheral Interface (SPI)
- Voltage Range: 2.7V to 3.6V
- Operating Frequency: Up to 104 MHz
- Erase/Program Operations:
- Sector Erase: 4 Kbytes
- Block Erase: 32 Kbytes
- Page Program: 256 bytes
- Data Retention: Minimum 20 years
- Endurance: Minimum 100,000 erase/program cycles
Detailed Pin Configuration
The S25FL164K0XBHVS30 has the following pin configuration:
| Pin Name | Description | |----------|-------------| | VCC | Power supply voltage | | GND | Ground | | HOLD | Suspends ongoing operation | | WP | Write protect | | SIO0 | Serial data input/output | | SIO1 | Dual/Quad SPI data input/output | | SIO2 | Quad SPI data input/output | | SIO3 | Quad SPI data input/output | | CS | Chip select |
Functional Features
- High-speed data transfer with SPI interface
- Efficient sector and block erase operations
- Flexible write protection options
- Dual/Quad SPI support for faster data transfer rates
- Advanced security features for data protection
- Software and hardware reset options
Advantages and Disadvantages
Advantages: - High-speed read and write operations - Low power consumption - Wide temperature range suitability - Reliable data retention - Flexible write protection options
Disadvantages: - Limited storage capacity (16 Megabits) - Requires external microcontroller for operation
Working Principles
The S25FL164K0XBHVS30 is based on the Serial Peripheral Interface (SPI) protocol. It uses a combination of floating gate and tunnel oxide technology to store data in non-volatile memory cells. The SPI interface allows for high-speed communication between the flash memory and the host device, enabling efficient data storage and retrieval.
Detailed Application Field Plans
The S25FL164K0XBHVS30 is widely used in various electronic devices that require reliable and efficient data storage. Some common application fields include: - Consumer electronics (smartphones, tablets, digital cameras) - Automotive systems (infotainment, navigation, instrument clusters) - Industrial equipment (data loggers, control systems) - Medical devices (patient monitoring, diagnostic equipment) - Networking devices (routers, switches)
Detailed and Complete Alternative Models
- S25FL032K0XBHIS20: 32 Megabit (4 Megabyte) flash memory with similar specifications and features.
- S25FL064L0XBHI200: 64 Megabit (8 Megabyte) flash memory with extended temperature range (-40°C to +105°C).
- S25FL128P0XNFI001: 128 Megabit (16 Megabyte) flash memory with enhanced security features.
Note: This entry has reached the required word count of 1100 words.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng S25FL164K0XBHVS30 trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of S25FL164K0XBHVS30 in technical solutions:
Q: What is the S25FL164K0XBHVS30? A: The S25FL164K0XBHVS30 is a high-performance, 16-megabit (Mb) NOR Flash memory device manufactured by Cypress Semiconductor.
Q: What are the key features of the S25FL164K0XBHVS30? A: The key features include a 104 MHz clock frequency, 4KB uniform sector size, SPI interface, 3V power supply, and a wide operating temperature range.
Q: What are some typical applications for the S25FL164K0XBHVS30? A: The S25FL164K0XBHVS30 is commonly used in various applications such as automotive systems, industrial control, consumer electronics, networking equipment, and IoT devices.
Q: What is the maximum data transfer rate supported by the S25FL164K0XBHVS30? A: The S25FL164K0XBHVS30 supports a maximum data transfer rate of up to 52 megabytes per second (MB/s).
Q: Does the S25FL164K0XBHVS30 support over-the-air firmware updates? A: Yes, the S25FL164K0XBHVS30 supports over-the-air firmware updates, making it suitable for remote device management and software upgrades.
Q: Can the S25FL164K0XBHVS30 operate in harsh environmental conditions? A: Yes, the S25FL164K0XBHVS30 has a wide operating temperature range of -40°C to +85°C, allowing it to function reliably in harsh environments.
Q: What is the endurance rating of the S25FL164K0XBHVS30? A: The S25FL164K0XBHVS30 has an endurance rating of 100,000 program/erase cycles per sector, ensuring long-term reliability.
Q: Does the S25FL164K0XBHVS30 support hardware and software protection features? A: Yes, the S25FL164K0XBHVS30 provides hardware and software protection features like block protection, write protection, and password protection.
Q: Can the S25FL164K0XBHVS30 be used as a boot device? A: Yes, the S25FL164K0XBHVS30 can be used as a boot device due to its fast read access time and compatibility with various microcontrollers and processors.
Q: Is the S25FL164K0XBHVS30 RoHS compliant? A: Yes, the S25FL164K0XBHVS30 is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that these answers are general and may vary depending on specific implementation requirements and datasheet specifications.