Xem thông số kỹ thuật để biết chi tiết sản phẩm.
1N5930B BK - Product Overview
Introduction
The 1N5930B BK is a semiconductor device belonging to the category of Zener diodes. This component is widely used in electronic circuits for voltage regulation and protection due to its unique characteristics.
Basic Information Overview
- Category: Zener Diode
- Use: Voltage regulation and protection in electronic circuits
- Characteristics: Precise voltage regulation, low impedance, and high reliability
- Package: Through-hole or surface mount
- Essence: Provides stable voltage reference
- Packaging/Quantity: Typically available in reels or tubes containing multiple units
Specifications
- Voltage: 3.9V
- Power Dissipation: 1.5W
- Zener Impedance: 10Ω
- Operating Temperature Range: -65°C to +200°C
- Package Type: DO-41
Detailed Pin Configuration
The 1N5930B BK typically has two pins, with the cathode connected to the semiconductor's N-type material and the anode connected to the P-type material.
Functional Features
- Voltage Regulation: The 1N5930B BK maintains a constant voltage across its terminals, making it suitable for stabilizing power supplies.
- Overvoltage Protection: When the input voltage exceeds the specified value, the diode conducts current to prevent damage to the connected circuitry.
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- Low impedance
- High reliability
- Compact size
Disadvantages
- Limited power dissipation capability
- Susceptible to thermal runaway under certain conditions
Working Principles
The 1N5930B BK operates based on the principle of the Zener effect, where it maintains a nearly constant voltage drop across its terminals when reverse-biased beyond the breakdown voltage.
Detailed Application Field Plans
The 1N5930B BK finds extensive use in various applications, including: - Voltage regulators in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting
Detailed and Complete Alternative Models
Some alternative models to the 1N5930B BK include: - 1N5929B BK (3.6V Zener diode) - 1N5931B BK (4.3V Zener diode) - BZX85C3V9 (3.9V Zener diode)
In conclusion, the 1N5930B BK Zener diode serves as a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its compact size and high reliability make it a popular choice for various applications.
[Word Count: 366]
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng 1N5930B BK trong giải pháp kỹ thuật
What is the maximum voltage rating of 1N5930B BK?
- The maximum voltage rating of 1N5930B BK is 3.3V.
What is the maximum current rating of 1N5930B BK?
- The maximum current rating of 1N5930B BK is typically 3A.
What are the typical applications of 1N5930B BK?
- 1N5930B BK is commonly used in voltage regulation, reverse polarity protection, and general purpose rectification in various electronic circuits.
What is the forward voltage drop of 1N5930B BK?
- The forward voltage drop of 1N5930B BK is typically around 1V at the rated current.
Is 1N5930B BK suitable for high-frequency applications?
- No, 1N5930B BK is not recommended for high-frequency applications due to its relatively slow recovery time.
What is the operating temperature range of 1N5930B BK?
- The operating temperature range of 1N5930B BK is typically -65°C to +175°C.
Can 1N5930B BK be used in automotive electronics?
- Yes, 1N5930B BK can be used in automotive electronics, provided it meets the specific requirements of the application.
Does 1N5930B BK require a heat sink for certain applications?
- Yes, for high-power or continuous operation, a heat sink may be required to dissipate heat effectively.
What is the package type of 1N5930B BK?
- 1N5930B BK is typically available in a DO-201AD (DO-27) package.
Are there any common failure modes associated with 1N5930B BK?
- Common failure modes include overcurrent conditions leading to thermal runaway, reverse voltage breakdown, and excessive junction temperature. Proper design and usage can mitigate these risks.